ホーム > DisplayLink
DisplayLink
DisplayLinkをFedoraで利用する。
- 環境: Fedora 12 (64bit)
- kernel: 2.6.32
- DisplayLink:I-O DATA LCD-USB10XT
環境構築
- libdlo
wget http://people.freedesktop.org/~berniet/libdlo-0.1.2.tar.gz tar xvfz libdlo-0.1.2.tar.gz cd libdlo-0.1.2 ./configure make sudo make install
- udlfb
sudo yum install -y git-core git clone http://git.plugable.com/webdav/udlfb cd udlfb make sudo make install
udlfb 0.4.0などが存在するが、make でerrorが発生する(drm_edid.hの問題)
- xf86-video-displaylink-0.3
wget http://projects.unbit.it/downloads/udlfb-0.2.3_and_xf86-video-displaylink-0.3.tar.gz tar xvfz udlfb-0.2.3_and_xf86-video-displaylink.tar.gz cd xf86-video-displaylink.tar.gz ./configure make sudo make install
このパッケージにもudlfbが含まれているが、すでにインストール済みのため不要。
接続
- LCD-USB10XB-Tを接続します。
- 青色のランプが点灯していることを確認。
- libdloのディレクトリに移動
- make testを実行
sudo libdlo-0.1.2/test/test1
表示されればOK
make testが実行されるまでディスプレイは認識されません(汗)
- make testを実行する前のdmesg
usb 1-4: USB disconnect, address 8 usb 1-4.3: USB disconnect, address 9 usb 1-4.4: USB disconnect, address 10 usb 1-4: new high speed USB device using ehci_hcd and address 11 usb 1-4: New USB device found, idVendor=0409, idProduct=005a usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected usb 1-4.3: new high speed USB device using ehci_hcd and address 12 usb 1-4.3: New USB device found, idVendor=17e9, idProduct=0156 usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4.3: Product: I-O DATA LCD-USB10XT usb 1-4.3: Manufacturer: DisplayLink usb 1-4.3: SerialNumber: [XXXXXXXXX] usb 1-4.3: configuration #2 chosen from 2 choices scsi9 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 12 usb-storage: waiting for device to settle before scanning usb 1-4.4: new full speed USB device using ehci_hcd and address 13 usb 1-4.4: New USB device found, idVendor=0eef, idProduct=0001 usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-4.4: Product: USB TouchController usb 1-4.4: Manufacturer: eGalax Inc. usb 1-4.4: configuration #1 chosen from 1 choice
- make test 実行後のdmesg
usbcore: registered new interface driver udlfb
の1行が追加される。
このページのURL: